One Stop Shop

Premium Products

Extensive Range

Expert Advice

Reliable Delivery

You Are Here: Main Section / Resin / General Purpose
General Purpose

AOC provide a range of resins suitable for the Marine industry. This includes Lloyds Approved resins such as the Altek H520 series, Vinyl Esthers and DCPDs.

H520-NEA Series

Altek® H520 NEBB-14

General Purpose White Orthophthalic Laminating Resin Altek® H520 is a prepromoted, thixotropic, general purpose low reactive orthophthalic polyester resin.

  • Low Exotherm
    The low exotherm of Altek H520 allows for the application of thick laminate sections that can cure at one time without the generation of excessive heat.

  • Good Secondary Bonding
    Altek H520 provides good chemical bonding between laminate application if proper application procedures are followed.

  • Superior Mechanical Properties
    When used with the proper glass reinforcement content, AOC€™s Altek H520 produces a composite with superior mechanical properties that can assist in the reduction of cracking.

  • Catalyst Indicator Dye
    Resin colour changes from blue to neutral after addition of peroxide. This colour change provides a visual assurance to the fabricator that the peroxide has been mixed with the resin.


EcoTek® H432 AOEG (WAXED)

Polyethylene Terephthalate Modified Polyester Laminating Resin

EcoTek H432 is a prepromoted thixotropic, low reactive, Polyethylene Terephthalate modified polyester resin.


AOC€™s H432 Polyethylene Terephthalate resin was originally designed to be used in acrylic bonding applications and has become a good all round general purpose resin.


H432 is produced from renewable bio-derived content and/or recycled content.

  • Low Styrene content

  • Superior processing - H432 was designed for quick wet out/roll out properties

  • Excellent adhesion to acrylic