One Stop Shop

Premium Products

Extensive Range

Expert Advice

Reliable Delivery

Tooling System

H034 ADX Series

H034 ADX

Hydropel Modified Vinyl Ester Resin

Benefits:
  • Maximum resistance to osmotic blistering when used for the skin coat of the complete composite.

  • Excellent strength and toughness of the finished composite part.

  • Provides improved resistance to cracking caused by the flexural failure of the laminate even when used only for the skin coat.

  • Good surface profile, with reduced post cure on finished parts.

  • Provides the toughness and resistance to heat needed to make durable tooling that will require minimal maintenance.

H834-RAA Series

Altek® H834-RAA-30

Low Profile Laminating Resin
Description

Altek® H834 RAA 30 is a pre-promoted, thixotropic, medium reactive polyester resin, designed for use in the manufacturing of boat and other composite parts using the hand lay spray up methods.

Benefits
  • Low Exotherm
    The low exotherm of Altek H520 allows for the application of thick laminate sections that can cure at one time without the generation of excessive heat.

  • Good Secondary Bonding
    Altek H520 provides good chemical bonding between laminate application if proper application procedures are followed.

  • Superior Mechanical Properties
    When used with the proper glass reinforcement content, AOC’s Altek H520 produces a composite with superior mechanical properties that can assist in the reduction of cracking.

  • Catalyst Indicator Dye
    Resin colour changes from blue to neutral after addition of peroxide. This colour change provides a visual assurance to the fabricator that the peroxide has been mixed with the resin.

Intech Range
PF07E

Millable Polyester Paste For Modelling Light

Thixotropic polyester paste, specific for modelling surfaces by numerically controlled milling on wood substrates, MDF, composite, fibreglass, polyurethane foam, coated polystyrene. Easy to apply, it allows to obtain high thicknesses from thin to high ones, hardening evenly and quickly. With the PF07E paste it is possible to obtain excellent surface finishes already at the end of the mechanical processing. It keeps the level of dust in the department low by releasing chips during milling. It is easy to repair by machine or hand overcoating; repaintable with polyester primers (Slem SK4, FP10, FP11, FV20, FV21, FV22). Very stable and resistant both in the construction phase and during extraction of the overmolded piece. Density 0.7 kg / l; application by extrusion or spray application. S.W. LT. 1 = KG. 0,7

SF07 Putty for PF07E

Putty for PF07E Tooling Paste Finishing

Thixotropic Polyester putty, specific for the finishing, repairing and levelling of the PF07E polyester tooling paste. Formulated with the same density, color and chemical and mechanical characteristics of the PF07E polyester tooling paste. It is possible to paint the putty with polyester and vinylester primers (SLEM SK4, FP10, FP11, FV20, FV21, FV22). The putty has a doble catalysis system, it can be used both with hardener in paste and liquid hardener in order to satisfy every need in the production process. P.S. LT. 1 = KG. 0,7

SF07 Putty for PF10E

Putty for PF10E Tooling Paste Finishing

Thixotropic Polyester putty, specific for the finishing, repairing and levelling of the PF07E polyester tooling paste. Formulated with the same density, color and chemical and mechanical characteristics of the PF07E polyester tooling paste. It is possible to paint the putty with polyester and vinylester primers (SLEM SK4, FP10, FP11, FV20, FV21, FV22). The putty has a doble catalysis system, it can be used both with hardener in paste and liquid hardener in order to satisfy every need in the production process. P.S. LT. 1 = KG. 0,7